1HVAC 5 Ton 13.8 SEER2 Review: Who It Fits and Who Should Skip It
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This 1hvac 5 ton 13 8 seer2 review looks at a central air conditioning system designed for larger homes. The unit delivers 5 tons of cooling capacity with a 13.8 SEER2 efficiency rating. It includes a vertical evaporator coil and a programmable thermostat. The condenser features copper tubes with aluminum fins and a factory-installed filter drier. The system uses R32 refrigerant and comes with a Dragonfly board kit for older furnaces. AHRI certification and ETL listing confirm safety standards. This package aims to provide reliable performance for specific residential setups that require substantial cooling power.
What stands out
- 5 Ton cooling capacity for large spaces
- 13.8 SEER2 efficiency rating for energy management
- Includes programmable digital thermostat with LCD screen
- R32 refrigerant with included Dragonfly board kit
- AHRI Certified and ETL Listed for safety
Who it fits
Good fit for
You should consider this unit if you need 5 tons of cooling for a large home. The 13.8 SEER2 rating helps manage energy costs for high-demand environments. It fits well in homes with existing furnaces that lack R32 leak detection, as the included Dragonfly board solves that issue. The vertical coil design suits tight mechanical rooms. If you want a complete package with a thermostat and necessary adapters, this listing provides the core components for installation.
Who should skip it
Skip this option if your home requires less than 5 tons of cooling, as oversizing leads to short cycling and humidity issues. The 13.8 SEER2 rating is modest compared to newer high-efficiency models, so you might prefer higher ratings for maximum savings. If your new furnace already handles R32 refrigerant, the included board kit may be redundant. This is a condenser and coil package, not a full ductless mini-split system, so ensure your existing ductwork supports this central air configuration.
Verdict: This 1HVAC system offers solid 5-ton cooling with essential installation components for older R32-compatible setups. It is a practical choice for large homes needing reliable central air conditioning.
Key specs for this unit
Cooling Capacity: 5 Ton
This rating indicates the unit can remove a specific amount of heat from your home each hour. Five tons is a large capacity, typically suited for spaces around 2,500 to 3,000 square feet. You should verify this matches your home’s heat load calculation. Oversizing can cause short cycling, while undersizing leaves rooms warm. Compare this figure with your square footage and insulation quality to ensure proper performance for your specific living area.
Efficiency Rating: 13.8 SEER2
SEER2 measures how efficiently the air conditioner uses electricity to cool your space over a typical season. A rating of 13.8 is the baseline for modern central units in many regions. Higher numbers mean lower energy bills. This rating helps you estimate annual operating costs compared to older models. When shopping, use this number to gauge long-term savings against the initial equipment investment for your climate zone.
Evaporator Coil: 24.5" Width (Vertical)
This dimension describes the physical size and orientation of the indoor coil component. A 24.5-inch vertical coil fits into standard ductwork configurations in many homes. It ensures proper airflow matching your duct size. This specific width helps maintain consistent air distribution. Check your existing duct dimensions before purchasing. Compatibility with your current duct layout prevents installation delays and ensures the system moves air effectively throughout your rooms.
Refrigerant: R32
R32 is a modern refrigerant with a lower global warming potential than older types like R410A. It operates at higher pressures and offers better efficiency. However, it requires specific handling and leak detection systems during installation. This listing includes a Dragonfly board kit to support R32 compatibility with older furnaces. Ensure your HVAC technician is trained in R32 systems for safe and correct setup.
Design and build details
The condenser unit houses a compressor and a coil made from copper tubes with enhanced aluminum fins. According to the listing, this construction supports reliable operation. The evaporator coil is all-aluminum, which the seller notes offers superior durability. It comes with a factory-integrated TXV kit to optimize energy performance. The system uses R32 refrigerant. Because this refrigerant requires leak detection, the package includes a Dragonfly board kit for older furnaces or blowers without built-in sensors.
The condenser measures 35.5 inches wide, 39.5 inches high, and 35.5 inches deep. You can choose between vertical and horizontal layouts for the coil. The vertical option is 24.5 inches wide, while the horizontal variant shares that width. A 21-inch vertical coil is also available. These dimensions help you plan the placement in your mechanical room or outdoor space. The unit is AHRI Certified and ETL Listed. It includes a high-pressure switch, ground lug connection, and extended-life capacitors.
Control is handled by a programmable digital thermostat with an LCD screen. It manages heating and cooling modes. The device runs on AAA batteries, which are not included. This setup allows you to set schedules for comfort and efficiency. The included thermostat provides basic interface functions without complex smart features. You should verify that your existing infrastructure supports the included components and refrigerant type before installation.
Installation and daily operation
Setting up this 1HVAC system requires careful planning due to its size and refrigerant type. The condenser measures 35.5 inches wide, 39.5 inches high, and 35.5 inches deep. You must ensure your space can accommodate these vertical dimensions. The evaporator coil is available in a 24.5-inch width, which fits standard ductwork but requires precise alignment.
A critical setup detail involves the refrigerant. This unit uses R32, which demands a specific leak detection system. The listing includes a Dragonfly board kit to enable this safety feature on older furnaces or blowers that lack built-in detection. Without this board, the system may not operate safely or efficiently. You should also choose your installation kit length, with options for 30 or 50 feet, to match your home’s layout.
Daily use centers on the included programmable thermostat. It features an LCD screen for clear viewing and allows you to control heating and cooling modes. The device runs on two AAA batteries, which you must provide. This manual control lets you set schedules to match your routine. The unit’s AHRI certification and ETL listing suggest it meets established safety and performance standards. You can rely on the high-pressure switch and extended-life capacitors to maintain stable operation over time. The factory-installed filter drier helps keep the system clean, reducing the need for frequent maintenance checks. Overall, the setup is technical, but the daily interface is straightforward.
Check Compatibility And Requirements
Before you buy, check your home’s compatibility. This system uses R32 refrigerant, which requires a leak detection system. The listing includes a Dragonfly board kit for older furnaces or blowers lacking this feature. Verify your existing equipment supports this requirement. You must also confirm your electrical setup handles the load. The included thermostat is programmable but needs AAA batteries, which are not provided. Plan for these supplies. Upkeep involves regular filter changes and coil cleaning to maintain the 13.8 SEER2 efficiency. Keep the area around the condenser clear of debris. This unit fits larger spaces, unlike smaller mini splits. It suits homes needing robust central cooling rather than zone-specific control. Ensure your ductwork is sealed and insulated to maximize performance. Compare this central system against ductless options if you lack existing ducts. This choice works best for permanent installations in standard residential structures.
Check before you buy
- Confirm your furnace has an R32 leak detection system or buy the kit.
- Ensure your electrical panel supports the unit’s amperage and voltage requirements.
- Verify your ductwork is sealed and insulated for optimal airflow.
- Purchase AAA batteries for the included programmable thermostat.
The product at a glance
1HVAC 5 Ton 13.8 SEER2 Central AC
Best for: large spaces requiring 5 ton cooling
- Cooling Capacity
- 5 Ton
- Efficiency Rating
- 13.8 SEER2
- Dimensions
- 35.5 × 35.5 × 39.5 inches
View on Amazon: 1HVAC 5 Ton 13.8 SEER2 Central AC Affiliate link
This 5 Ton central air conditioner offers 13.8 SEER2 efficiency. It includes a 24.5-inch vertical evaporator coil and a programmable digital thermostat. The system uses R32 refrigerant and comes with a Dragonfly board kit for leak detection. It is AHRI certified and ETL listed. This unit suits larger homes needing substantial cooling capacity with reliable, certified components.
Pros
- 5 Ton cooling capacity for large spaces
- 13.8 SEER2 efficiency rating
- Includes programmable digital thermostat
- AHRI certified and ETL listed
- Includes R32 Dragonfly board kit
Cons
- Requires separate installation kit purchase
- Thermostat needs AAA batteries not included
- No smart home integration listed
Good fit if
- You need 5 Ton cooling power
- You want AHRI certified equipment
- You are installing R32 refrigerant
Skip if
- You need less than 5 Ton capacity
- You want included smart app control
- You prefer horizontal coil layout
Verdict: 1HVAC 5 Ton 13.8 SEER2 AC Unit fits larger homes needing robust cooling and certified safety standards. It provides essential components for R32 systems without unnecessary extras.
Specifications side by side
| Spec | 1HVAC 5 Ton 13.8 SEER2 Central AC |
|---|---|
| Cooling Capacity | 5 Ton |
| Efficiency Rating | 13.8 SEER2 |
| Dimensions | 35.5 × 35.5 × 39.5 inches |
| Size | 24.5" Width (Vertical) |
Frequently asked questions
What is the physical size of the 1HVAC condenser unit?
The condenser measures 35.5 inches wide, 39.5 inches high, and 35.5 inches deep. You must ensure your outdoor space can accommodate these vertical dimensions. The unit is designed to stand vertically, requiring a footprint of roughly 35.5 by 35.5 inches. Proper clearance is essential for airflow and maintenance access around the unit.
Does this system include a thermostat?
Yes, the package includes a programmable thermostat. This allows you to set specific temperature schedules for your home. It helps manage energy use by adjusting cooling based on your daily routine. You can program different temperatures for various times of the day to maintain comfort without wasting energy.
What type of refrigerant does this unit use?
This system uses R32 refrigerant. R32 is known for being more environmentally friendly than older options. It also offers better heat transfer efficiency. You must ensure your installation includes proper leak detection, as R32 systems require specific safety measures to prevent gas loss and ensure efficient operation over time.
Is the evaporator coil made of copper or aluminum?
The evaporator coil is all-aluminum. The seller notes this material offers superior durability compared to some alternatives. It is designed to resist corrosion and maintain performance. This construction choice supports long-term reliability. You should verify that your ductwork and airflow are compatible with an all-aluminum coil setup.
Who is this 5-ton unit best suited for?
This unit is best for large spaces requiring 5 tons of cooling. It is typically suited for homes around 2,500 to 3,000 square feet. If your home is significantly smaller, this capacity may be too powerful. Oversizing can lead to short cycling. You should consult an HVAC professional to confirm the load calculation for your specific layout.
Does the package include a leak detection board?
Yes, the listing includes a Dragonfly board kit. This kit is designed for older furnaces or blowers that lack built-in leak detection. It ensures your system meets safety standards for R32 refrigerant. You must verify your existing equipment supports this feature. Proper integration is key to safe and compliant operation of the refrigerant system.
What is the SEER2 rating of this AC unit?
The unit has a 13.8 SEER2 efficiency rating. SEER2 is the newer standard for measuring seasonal energy efficiency. A higher number indicates better energy savings over a cooling season. This rating reflects the unit's performance under updated testing conditions. It helps you estimate annual operating costs based on your local electricity rates and usage patterns.
Can this unit be installed in a vertical orientation?
Yes, the evaporator coil is designed for vertical installation. The unit measures 24.5 inches in width when oriented vertically. This allows for flexible placement in tight mechanical rooms or closets. You must ensure the mounting structure supports the weight. Proper vertical alignment is critical for condensate drainage and optimal heat exchange performance.
